The Overview page tells you at a glance whether your website is backed up. From here you start a backup and see your backup plans and the latest backups.
The Overview is the first page of the plugin. A click on cloneworx in the WordPress menu opens it.
The page at a glance
- Overview is the menu item of the page, in the WordPress menu under cloneworx.
- The status tile shows with colour, symbol and text how the backup of your website is doing.
- Back up now starts a backup right away.
- Restore backup leads to the Restore page.
- Backup plans shows your plans with their next run.
- Recent backups shows the last three backups.
- More … opens the menu of a backup.
The status tile
The status tile states a result. The plugin derives it from the backups, the backup plans and the targets. If several states apply, the order of the table decides: the topmost one wins.
| State | Meaning | What you can do |
|---|---|---|
|
red The last backup failed. |
The last finished backup failed. The tile shows the time, the cause, the next step and the last valid backup. | Follow the next step in the tile. The link Log shows the details. More on this: When a backup fails or ends with warnings. |
|
red The plan “…” has not made a backup for …. |
An active plan is overdue: its last valid backup is older than its rhythm plus a tolerance. The tolerance is half the rhythm, at least 6 hours. A daily plan is overdue after 36 hours. | Follow the next step in the tile. Back up now starts the backup right away. To make sure the scheduled times are kept in future: Start backups on time: set up a system cron. |
|
yellow The storage target “…” is disconnected. |
The plugin can no longer read the stored credentials of a target, or the target rejected them. For a target with a sign-in at Google or Dropbox, the second cause is different: the provider no longer accepts the stored consent. | Click Renew credentials. How it works: Renew the credentials of a target. For a target with a sign-in at Google or Dropbox the button is called Connect again: Store backups in Google Drive, Store backups in Dropbox. |
|
yellow Your website is backed up, with warnings. |
The last backup is complete, but not everything went smoothly: files were not readable or had vanished, or one target failed while another has the backup. | Open the Log. It lists the affected entries by name. |
|
green Your website is backed up. |
The last backup was complete. | Nothing. |
|
grey Your website is not backed up yet. |
There is no finished backup yet. | Click Back up now, or set up a plan with Schedule backup. |
For a disconnected target the tile shows the next step: Next step: enter the credentials for “…” again on the Targets page., for a target with a sign-in at Google or Dropbox Next step: connect “…” again on the Targets page.
Aborted and running backups do not change the result. As long as the page is loading the state, the tile is grey and shows a rotating hourglass. If the page cannot load the state, the tile shows the message from the server in red.
In every state the tile shows the next run: Next backup is the earliest next run of all active plans, with the name of the plan. If no plan is active, it says not scheduled yet.
The last backup failed
- The last backup failed.
- The line gives the time and the cause in plain language. The link Log after it opens the log of this backup.
- If a target failed, you see the target and the reason here. Below it is the unchanged message from the target or from the client.
- The next step depends on the cause.
- Last valid backup shows the date, size and target. If there is none, it says No valid backup yet.
- Next attempt replaces Next backup in this state.
The last valid backup shown in the tile is the most recent backup that ended complete or with warnings and is still stored completely at one target or more.
| Cause in the tile | Next step in the tile |
|---|---|
| Not enough free space. | Next step: free up space in the work folder or at the target, then run the backup again. |
|
No target has the backup. No target is reachable. A target is not usable. |
Next step: check the targets on the Targets page (connection test), then run the backup again. |
| The database is not MySQL or MariaDB. | This website does not run on MySQL or MariaDB; backups are not possible here. |
| any other cause, for example Too many steps without progress. or A part failed verification twice. | Next step: run the backup again. If it fails again, the log has the details. |
A plan is overdue
- The title names the plan and the time since its last valid backup.
- Last valid backup shows the date, size and target, followed by the link Log.
- The cause, here The scheduled run was missed: no task source called the website within one hour after the time (last missed run: …).
- The next step, here Set up a system cron that calls the plugin every five minutes, for example: …
- Back up now starts the backup right away.
Cause and next step depend on why the plan is overdue:
| Cause | Next step |
|---|---|
| The scheduled run was missed: no task source called the website within one hour after the time (last missed run: …). | Set up a system cron that calls the plugin every five minutes, for example: … |
| The last scheduled run of the plan could not start. The reason follows. | The step that belongs to this reason, for example Look at the log, then run the plan by hand. |
| The last run of the plan failed. The cause of the failure follows. | The step that belongs to this cause. |
| The plan is active, but no valid backup has been made since then. | Start a backup by hand on the Backup page and look at the log. |
| Does not run on schedule: without cloneworx Backup Pro only one plan runs on schedule, currently “…”. | Leave only one plan switched on, or activate cloneworx Backup Pro with a valid licence. |
| Does not run on schedule: the rhythm of this plan needs cloneworx Backup Pro. | Activate cloneworx Backup Pro with a valid licence, or choose another rhythm for the plan, or pause the plan. |
|
Until … the plan did not run on schedule: without cloneworx Backup Pro only one plan runs on schedule, and another plan was switched on. Until … the plan did not run on schedule: its rhythm needs cloneworx Backup Pro, and cloneworx Backup Pro was not active or its licence was not valid. |
The plan runs again at its next time. For a backup right away, start one by hand on the Backup page. |
The title has three forms:
- The plan “…” has not made a backup for ….
- Your website has not been backed up for …. The title reads like this when the last valid backup of the plan is also the last valid backup of the website.
- The plan “…” has been due for … and has not run yet. The title reads like this when the plan has never made a valid backup, or none since it was switched on or changed. Such a plan is overdue as soon as its first scheduled time has passed by more than the tolerance.
A backup plan starts at its scheduled time only if a task source triggers the website, for example a visitor to the website, the open Overview or a system cron. If no task source arrives within one hour after the scheduled time, the run counts as missed. The plugin does not make up for it later; the plan runs again at its next regular time. A website that has no visitor and no system cron around its scheduled times therefore makes no scheduled backups.
A target is disconnected
- The title names the disconnected target.
- The cause: The stored credentials can no longer be read; the security keys in wp-config.php were probably changed., The stored credentials cannot be read because the key cannot be read (Settings → Key)., The target rejected the stored credentials. For a target with a sign-in at Google or Dropbox, the last message is replaced by The provider no longer accepts the stored consent: it was withdrawn or has expired.
- The next step: enter the credentials again on the Targets page. For a target with a sign-in at Google or Dropbox: connect the target again there.
- Renew credentials leads to the Targets page. For a target with a sign-in at Google or Dropbox the button is called Connect again.
The picture shows a target with credentials. How to connect a target of the type Google Drive or Dropbox again: Store backups in Google Drive, Store backups in Dropbox.
Below the next step you see Last backup, if there is already a finished backup, and below that Next backup. If the buttons do not fit side by side in the tile, they are stacked as in the picture.
Backed up, with warnings
The yellow tile shows Last backup with date, size and target, followed by the link Log. Below it are the number of warnings and their kind: not readable, vanished, unsupported, failed targets, database notes. If a target failed, the tile then shows the target, the reason and the unchanged message from the target.
No backup yet
- Your website is not backed up yet.
- The note names your first plan and its target: “Back up now” runs the plan “…” and stores the first backup in “…”. If there is no plan yet, it says Create a plan first; “Back up now” then runs it.
- Next backup shows the next run of an active plan.
- Back up now starts the first backup.
- Schedule backup leads to the Backup page. As long as no plan is active, this button is highlighted.
The buttons of the status tile
| Button | When it is shown | What it does |
|---|---|---|
| Back up now | always; blocked as long as a job is running | Starts a backup according to one of your plans. |
| Restore backup | as soon as there is a valid backup | Leads to the Restore page. |
| Renew credentials; for a target with a sign-in at Google or Dropbox Connect again | as long as the status tile reports a disconnected target | Leads to the Targets page. |
| Schedule backup | as long as the status tile is grey | Leads to the Backup page, where you create plans. |
What “Back up now” starts
The plugin checks the targets first, then the plans:
- No usable target: nothing starts. The button leads to the Targets page, no matter how many plans there are.
- No plan: nothing starts. Below the status tile the yellow message No backup plan yet. Create a plan first. appears with the link Schedule backup.
- One plan: the backup runs right away according to this plan.
- Several plans: the dialog window Which plan? shows one button per plan with the name of the plan. A click starts this plan.
- The target of the plan is not usable: nothing starts. Below the status tile the red message The backup could not be started: … appears with the reason, for example The plan has no usable target. The link Show global log opens the global log.
The plan may be paused: the pause only affects the schedule. Step by step: Create a backup right now.
While a backup is running
- What the running backup contains and where it goes, for example “Database, Files → SFTP 1”.
- The progress display shows the phase, the entries, the size and the remaining time.
- Abort backup stops the backup at the next step.
- Back up now is blocked as long as a job is running.
The progress display also appears when the schedule or the command line started the backup: the open page reads the state again every 60 seconds and picks up a running job. The backup keeps running when you close the page. When it ends, the result appears as a message below the status tile, and the status tile and the list are reloaded. Everything about the progress display and the messages: Progress, messages and log.
After a restore
After a restore the rollback stays open until you keep the restore or undo it, at most 7 days. During that time the status tile has an additional line: A restore is applied and can still be undone until …. The link Keep or undo it after it leads to the Restore page. More on this: Keep or undo a restore.
The note on notifications
If notification on errors and warnings is switched off, you only find out about a failed backup when you look yourself. The Overview therefore shows a red message below the status tile.
- The message: Notification on errors and warnings is switched off in the settings. This is a security risk for your data.
- Dismiss hides the message. It is back the next time you open the page.
- Open settings leads to the Settings page.
The message comes back every time the page is opened until you switch the notification on: Set up email notifications.
When stored data of the plugin cannot be read
If the plugin cannot read one of its stored settings, a red message appears below the status tile: Stored data of the plugin could not be read: …. Automatic runs are paused and the unreadable value was saved aside; check the WordPress options table or save the affected settings again.
The “Backup plans” tile
- Manage plans leads to the Backup page. There you create plans, change them and switch them on or off.
- The dot is green for an active plan and grey for a paused one.
- The name of the plan, its rhythm in words and its target, for example “Daily backup · Daily at 03:22 · SFTP 1”.
- Next run shows the date and time of the next backup of this plan.
- The time zone of the website. All times in the tile are given in this time zone.
On the Overview the tile is read-only. Instead of the next run, a plan may show:
- Paused, no backups are scheduled.
- Paused: the plan has no target. Choose a target to switch it on. The row of the plan then reads no target.
If the last run of a plan could not start at its scheduled time, the plan also shows in red The last run could not start: … with the reason.
If there is no plan yet, the tile reads No plan yet. At the top right there is then Add plan instead of Manage plans; the button opens the form for a new plan on the Backup page right away. Every field of a plan is explained in Backup plans: tile and form.
The “Recent backups” tile
The tile is missing as long as the status tile is grey. The list has no header row and cannot be sorted: the newest backup is at the top. A running backup is shown as the first row in the list.
- All backups leads to the Backup page with the whole list.
- The dot shows the result: green for a complete backup, yellow for a backup with warnings, red for a failed one. A grey dot means aborted, a spinning ring means: the backup is running.
- Date and time. The list always gives the full date, never “today” or “yesterday”.
- The size of the backup. For a failed, aborted or running backup there is a dash.
- The targets of the backup.
- The type. For a valid backup it says Full, otherwise the status: Failed, Aborted or Running. If the backup left out another WordPress installation inside the website, the line below reads Not backed up: another WordPress installation in …. Install the plugin there as well; see the log.
- More … opens the menu of the backup.
- The lock means: the backup is locked. It is never deleted automatically.
- PROThe key means: the backup is encrypted. More about this: Encrypt backups.
- The check mark shows the result of the last check: a green tick for readable and complete, a red cross for damaged or incomplete.
When the mouse pointer is on the lock, the key or the check mark, a tooltip with the meaning appears. It also appears when you reach the symbol with the keyboard or tap it. The tooltip on the check mark gives the date of the check.
If the tile is too narrow for all columns, the size is hidden. If the space is still not enough, the list in the tile can be scrolled sideways.
The “More …” menu
- Restore leads to the Restore page.
- Check backup reads the backup at its targets and reports whether it is readable and complete. More on this: Check a backup.
- Lock backup protects the backup from automatic deletion. For a locked backup the entry is called Unlock backup. More on this: Protect a backup from deletion.
- Log opens the log of this backup in a dialog window.
- Delete backup deletes the backup at its targets after a confirmation prompt. More on this: Delete a backup.
The menu shows only what is possible for this backup:
- Restore and Lock backup are only available if the backup is stored completely at one target or more.
- Download is added if the backup is stored completely in a local folder. The entry then comes before Log. More on this: Download a backup.
- If only damaged copies of the backup are left at its targets, Check backup, Log and Delete backup remain.
- A failed or aborted backup has left nothing at any target. Its menu offers Log and Delete entry.
- A running backup offers only Log.
The menu is the same as on the Backup page.
One view, no switch
The Overview has only one view. The switch between Compact and Extended, which is at the bottom left on the other pages, is not available here. What the page shows therefore never depends on the chosen view.
Good to know
- In the status tile, a time of today, yesterday or tomorrow is given in words, for example “today, 12:11” or “tomorrow, 03:00”. In the lists below, the full date is always given.
- As long as the page is open, it reads the state and the plans again every 60 seconds.
- Only one job runs at a time. As long as one is running, Back up now is blocked. If during that time you choose Check backup in the menu of a backup or confirm the deletion of a backup, the page reports in red A job is already running.
See also
- How the interface is laid out
- The “Backup” page
- Create a backup right now
- Restore the website from a backup
- State, logs and support with WP-CLI
On the command line
WP-CLI not set up yet? How to install WP-CLI.
The result of the status tile is also available on the command line, with the last backup, the last valid backup, an overdue plan and a disconnected target. The output is in English.
# Show the state of the website wp cloneworx-backup status # Show the backup plans with their next run wp cloneworx-backup plan list # Show the last three backups wp cloneworx-backup backup list --limit=3 # Run a backup plan now wp cloneworx-backup plan run "Daily backup"